Summitload894

Decoding the serial number on a Smith & Wesson firearm requires some research, as several codes were utilized for guns manufactured before and after World War Two. Reading the serial number is appealing for gun owners because the letters and numbers can reveal the. Campus information and resources related to COVID-19 Vaccines Testing Reported Cases Request Information Tuition and Costs Visit PVAMU Latest News Campus Announcements Newsroom Connect with PVAMU Happenings On the Hill. Serial Number Format Before 1997. 4-6 numbers that are sequential with no breaks for production month or year. Serial Number Format After 1997-May 2012. Alpha-numeric (e.g., XJ5050 or 4J5050) with breaks for production month and year.

Smith Wesson 5906 Serial Number Date Of Manufacture Code Today, Smith & Wesson is mostly known for revolvers and their growing line of M&P pistols. Despite the rapidly growing popularity of these polymer-framed striker fired semi-auto pistols, there’s also a lot of buzz around the former metal-framed S&W pistols that were discontinued a few.

Smith and Wesson Serial Number Date of Manufacture J Frame Revolver Lookup For models 36, 37, 38, 49, 50 and pre model number versions. 1950 = start at 1 1952 = 7369 - 21342. Please enter the serial number below. Please enter the serial number below. Smith and wesson model 60 serial number dates 38 special, 2 in. Pinned barrel, stainless. R prefix serial number dates it to 1969. 60 no dash the.38 chiefs special, j frame round butt serial number 477362 year of manufacture there is. We do not have time to answer questions about serialization. Smith & Wesson will issue a letter for a $50 fee. 1980 AAA 1981 AAD 2120 Oct 1982 AAF9000 Dec. 1982 ABL3 3999 Jan. 1983 ABL 40000 Oct. 1983 ADE 6700 Dec. 1983 ADT 2999 Jan 1984 ADT 3000 AET prefix 66-2 Grips dated 5/13/83 HG7568 from 2012 Nov. 1984 AEV-ARJ Jan. 1985 AHA 0667 Jul.

I know you’ve been on the edge of your seat hoping for Part 2 of The Quest for the Ideal Carry Revolver. Unfortunately, thanks to nasty winter weather and the past week’s wild ammo market, I haven’t been to the range much lately. So until I get more trigger time with the revolvers I’m trying out, enjoy my best attempt at deciphering Smith & Wesson’s revolver catalog.

We got some good feedback on our reference guide to 1st-3rd Gen S&W Semi-Autos, so for our Wheel Gun Wednesday series I thought I’d put together a similar chart for all of the S&W revolvers. And that’s exactly what I would have done except Smith & Wesson’s revolver model numbers have all been assigned by a mad genius. Sometimes there appears to be a logical numbering system at work, but it’s applied inconsistently, and varies from one product line to the next.

So instead of one big comprehensive chart for every Smith & Wesson revolver ever made, I’m offering this smaller bite-sized chunk: every post-1957 .38 Special and .357 Magnum revolver from S&W that officially entered full-scale production.

Why 1957? That’s the year when S&W switched over to assigning model numbers to each revolver rather than identifying them only by unique names (e.g., “Registered Magnum” or “Combat Masterpiece”). The nicknames still remained in many cases, but they could refer to a family or series of revolvers with similar characteristics.

Smith Wesson Serial Numbers Year

In the charts below, I’ve grouped the models by frame size and then by series. Where possible, I’ve listed the defining features of each series. For each model, there’s information about its caliber, frame material, sights, finish, and ammo capacity. Here’s a handy key for how to read the chart:

Series Name: Some of these names were used in the actual S&W catalog but others are just nicknames. S&W stopped using some of these names, even when production of the model continued. For example, the “Military & Police” designation was dropped from the K-frame revolvers years ago (and recycled for their polymer semi-autos and AR rifles), but I’ve kept the designation in the chart for all revolvers that fit the original M&P criteria.

Series Features: Each series is identified by some unique features that don’t typically apply to other models of that frame size.

Caliber: For this post, all models are .38 Special or .357 Magnum. Most S&W .38 Special revolvers can handle +P ammo, but the +P designation doesn’t appear on the barrel of some older models so it’s always best to contact S&W customer service and verify that it’s safe.

M And T

Frame Material: S&W has used a variety of metals to construct their revolvers over the years but the frames all have been either steel or a lightweight aluminum alloy. Some variants of the alloy guns contain Scandium for an even lighter overall weight. The absolute lightest S&W revolver have also included a Titanium cylinder. I’ve noted the use of Sc or Ti on the chart when the only available version of a given model use those alloys. Other alloy frame guns listed on the charts may have Sc frame or Ti cylinder variants that exist in addition to the standard aluminum or steel versions.

Model Number: The model number assigned to the product without any prefixes or suffixes (with the exception of the “Plus” model L-frames).

Sights: Sights can be fixed or adjustable. The fixed sights are generally a ramp style front sight with a gutter in the top strap to form the rear sight. S&W has used a variety of adjustable rear sights over the years, but most have a removable blade insert. Front sights on models with the adjustable rear can be the traditional ramp style machined into the barrel, but newer front sights are pinned, and can be removed and replaced with aftermarket front sights.

Finish: For the sake of simplicity, I’ve only used the labels “black” or “stainless” on the chart. Black can refer to a matte black finish or a glossy blue finish. Older models with a blue finish were often also available with a shiny nickel plated finish. Stainless can refer to the polished or matte stainless steel revolvers, or alloy revolvers with a silver matte finish that mimics the stainless steel look.

Ammo Capacity: All J-frame .38 Special and .357 magnum revolvers have a five-round capacity. K-frames all have six. L-frames can hold six or seven shots depending on the model. Older N-frame designs have a six-round capacity but the newer ones hold eight.

Other Info: I’ve tried to keep the chart as complete as possible while still being readable. That said, there is still information you won’t be able to find here. The most significant omission is barrel length. Almost every model has been offered in multiple barrel lengths at some point but availability varies. The more common barrel lengths are listed in the summary for each frame size.

I also haven’t listed the variants available for each model. If a model number contains a suffix like “PD” or “Lady Smith”, it might mean that it has features that distinguish it from other models in the same series. Here’s an incomplete list of the more common variants and some other suffixes you might see on model numbers:

• PD: “Personal Defense”. Usually indicates Scandium alloy frame.
• Sc: Indicates frame with Scandium Alloy.
• Ti: Titanium Cylinder. Usually accompanied by Scandium alloy frame.
• Lady Smith: Name given to a number of variants in different calibers and frame sizes. Usually accompanied by special grips and engraving.
• Airweight: Indicates an Aluminum alloy frame.
• Airlite: Indicates a Scandium alloy frame.
• Night Guard (NG): Series introduced in 2008 with models in various calibers and frame sizes. All have a 2.5-inch barrel, alloy frame, steel cylinder, Tritium front sight, and a removable Cylinder and Slide brand fixed rear sight.

J-Frame

The J-frame S&W revolver has become so ubiquitous that the term is often used as a generic reference to almost any small frame snub nosed revolver. The most common barrel length for a J-frame is 1 ⅞” but 3-inch models are also plentiful along with some other less common sizes.

J-Frame model numbers are determined by frame material, hammer/action type, and finish. Unlike K and L frame revolvers, S&W doesn’t use a separate model number for J-frames with adjustable versus fixed sights.

A few J-frame models started out as being offered in only .38 special, but in the mid-1990s, were beefed up to handle .357 magnum. I’ve included each of these multi-caliber models as two separate entries in the chart.

The three major J-frame model series are as follows:

• Chief’s special: Standard hammer. Most have fixed sights but a few have been offered with adjustable sights.
• Bodyguard: The original S&W Bodyguard. They include a hammer shroud with a small protrusion that allows the user to cock the hammer for single action shots.
• Centennial: This is the name generally given to all “hammerless” S&W revolvers. They aren’t literally hammerless, but the hammer is completely internal, which means these revolvers can only be fired in double action.

K-Frame

The classic S&W K-frame is one of Smith & Wesson’s most enduring designs. Picture a typical 20th century policeman’s “service revolver” and it probably looks a lot like a K-frame with a 4-inch barrel. These mid-size revolvers have also been offered with long 6-inch barrels for target models, and 3-inch, 2.5-inch, and 2-inch snub nose versions for concealment.

Model numbers are based on finish, caliber, and whether the gun has fixed or adjustable sights.

How To Date Smith And Wesson By Serial Number

There have been three major series of .38 Special and .357 magnum K-frames along with a couple of unique models:

• Military & Police: The original K-frame. They have fixed sights and no underlug or shroud around the ejector rod. The .357 magnum versions were added to the catalog along with the Combat Magnum series.
• Combat Masterpiece: Essentially identical to the M&P line, but with the addition of adjustable sights. The model 68 — a special run for the California Highway Patrol — also includes a shrouded ejector rod.
• Combat Magnum: These are the .357 versions of the Combat Masterpiece. The Combat Magnums have a shrouded ejector rod as standard.
• Target Masterpiece: Target guns with adjustable sites and typically offered with a 6-inch barrel, but also available with 4-inch and 8 ⅜-inch barrels. The later models added a full underlug to the barrel.
• Alloy K-frames: The only non-steel K-frame revolvers have been the 12 and 315. The Model 12 was offered for many years as a lightweight version of the model 10, but was discontinued in 1986. The 315 was offered for a very short time in 2008 as a part of the Night Guard series with a 2.5-inch barrel and upgraded sights. By some estimates, fewer than 1000 were ever produced.

L-Frame

The medium-large L-frame .357 models came along in the early 1980s as a bridge between the hefty N-frames and the smaller K-frames. Common barrel lengths are similar to the K-frames, with the 4-inch models being the most common and 6-inch, 3-inch, and 2.5-inch versions also available.

Also similar to the K-frame revolvers, the L-frame model numbers are determined by sights, finish, and frame material.

S&W has used the L-frame for a lot of its more innovative and experimental models. The 586 and 686 “plus” models were among the first 7-shot medium-frame revolvers on the market, and several lightweight alloy L-frames have been produced at various times.

• Distinguished Combat Magnum: These are the flagship models of the L-frame line. They feature a full barrel underlug, steel frame, and adjustable sights.
• Distinguished Service Magnum: Nearly identical to the Combat Magnum, only with fixed sights.
• 619 & 620: These two were introduced as a replacement for the K-frame .357 models that S&W discontinued in the early 2000s. They are very similar to the 681/686, but have a slimmer barrel profile with a shrouded ejector rod rather than a full underlug.
• 520: Not to be confused with the short-lived N-frame model 520. This was essentially an alloy framed version of the 620.
• 386: The model with no name. There have been several versions of the 386, each with its own name and features. The common attributes are an alloy frame with a black finish and adjustable sights. With the exception of the 386 PD, all have had a 7-shot cylinder.
• 242: The only “Centennial” hammerless Smith & Wesson that’s not a J-frame. Designed for concealed carry, it’s also the only L-frame chambered in .38 Special rather than .357 Magnum.

N-Frame

Smith And Wesson Serial Number Lookup

The S&W Model 27 N-Frame was the original platform for the .357 Magnum cartridge. The design proved to be durable, but it’s considered large and heavy for a 6-shooter by today’s standards. With modern metals, S&W has managed to cram eight rounds into the newer N-frame .357s.

What Year Smith Wesson Serial Number

Available barrel lengths for N-frame revolvers have varied widely over the years, and include 3 1/2-inch, 4-inch, 5-inch, 6-inch, and 8 3/8-inch models, among others.

Smith And Wesson Age By Serial Number

• The Original Magnums: The Model 27 was the original .357 and was initially called the “Registered Magnum”. It has a deep blue finish, shrouded ejector, and adjustable sights. The budget model 28 “Highway Patrolman” has all the same features, but with a few minor changes, such as a slightly less polished finish.
• 8-Shot Magnums: Neither the alloy 327 or the steel 627 have had an official name. Both of these 8-shot N-frames have been offered with various features and barrel lengths.
• Military & Police: In 1980, the New York State Police ordered a model 27 with fixed sights. The ordered was never delivered, and a few thousand of these ended up in the general market. In 2005, S&W recycled the model number 520 for an alloy L-frame .357.

Work in Progress

I am by no means an expert on Smith & Wesson revolvers. Most of this information is just stuff I’ve picked up from window shopping for Smith & Wesson revolvers over the years. I’ve tried to verify and flesh out the info using other sources like the Standard Catalog of Smith & Wesson, but there are probably some omissions and errors in there somewhere. If you spot one, be sure to let me know. I’ll be checking on this post periodically and will update it with corrections and additions when I have the chance.

The Smith & Wesson Model 10 Military and Police .38 Special Revolver

By Chuck Hawks

Smith & Wesson is currently marketing a semi-automaticpistol as a Military and Police (M&P) model, but the name is taken from thedouble action (DA) revolver that made it famous. Later, the same revolver wasassigned the model number '10,' when S&W stopped naming theirhandguns and gave them numbers, instead. To this day, shooters over 30associate the M&P name primarily with the forged steel Model 10 revolverthat is still going strong and was the mainstay of the S&W police (andcivilian) handgun line for decades, not the more recent plastic-framed semi-auto.

The S&W .38 Hand Ejector, fixed sight service revolverhas, in one form or another, been a best seller in the S&W revolver linesince 1899. The Military and Police tag was added immediately after the gun'sintroduction, as a result of an 1899 order from the U.S. military for thousandsof Smith & Wesson's new revolvers in the then U.S. service standard .38 LongColt caliber.

In addition, in 1899 S&W introduced a new caliber in the M&P,the .38 Special. (The actual bullet diameter is .357'). This was an enlarged andmore powerful cartridge designed to address the stopping power deficiencies ofthe .38 Long Colt service cartridge. The M&P revolver and the .38 Specialcartridge have been associated ever since.

Smith And Wesson M&p Revolver Serial Number Lookup

As a historical note, the S&W Military and Police wasengaged in an intense competition with Colt's best selling Police PositiveSpecial service revolver for both the civilian and police markets during thefirst half of the 20th Century. Ultimately, S&W finally achieved market dominance dueto their ability to undersell Colt.

M&P revolvers have been periodically updated. Thefirst major change came in 1902, when the lock-work was simplified and anejector rod locking lug was added beneath the barrel, latching the cylinderinto the frame at front and back.

Starting in 1904, customers had a choice ofsquare or rounded grip frames. In 1915 the mechanism was again improved by theaddition of an automatic hammer block that rendered the revolver completelysafe with all six chambers loaded. The fixed sights were also improved at thesame time.

S&W began heat treating cylinders in 1919. M&P revolversproduced between 1942 and 1944 had a 'V' prefix added to their serialnumbers and were known as 'Victory' models. Incidentally, the S&WMagna grips were introduced after the end of World War II and, at some point,the hammer block actuation was changed from a spring to a cam.

The Model 10 designation was introduced in 1957/1958, so the revolver became known as the'.38 Military & Police Model 10,' the designation used by the Gun Digest, the Shooter's Bible and practically everyone else until 2010. Whateverit is called, this .38 Special, fixed sight revolver is the most popular in history, with over 6,000,000 sold and production continuing today.

Model 10's made at various times between 1958 and 2010 wereavailable with 2', 3', 4', 5' and 6' barrels. Therewere also limited production 'distributor special' versions with2.5' barrels.

However, the 4' and 6' barrel lengths have alwaysbeen the most popular. These were elegantly tapered barrels, without atop rib and only a small bottom lug (about ½' long) to serve as a latchfor the tip of the ejector rod. There was also an otherwise identical 4'heavy barrel (no taper) M&P version.

Prior to 1981, the barrel wasthreaded into the frame and pinned in place, while current Model 10 barrels aresimply threaded into the frame sanspin. The gun reviewed here has a 6' barrel, my favorite length for .38 revolvers.

The caliber is marked on the right side of the test gun'sbarrel, reading '38 S&W Special Ctg.' while 'Smith &Wesson' is stamped on the left side. The serial number is stamped on thebottom of the grip frame.

Our test gun's serial number indicates that it wasprobably made in 1977, before the 10-7 engineering change took place(later in 1977). The model number is stamped inside the frame behind thecylinder crane; thus, the cylinder must be swung open to see the model number.In the case of the test revolver, it reads 'Mod. 10-5.' That standsfor Model 10, 5th engineering revision. The fifth engineering revision (-5) wasa change from a 1/10' wide 'half moon' front sight blade to a1/8' wide ramp style front sight blade; this was instituted in 1962. Ourtest gun was therefore part of the Model 10-5 production run, manufactured between1962 and 1977.

Between 1958 and 2012 there were a total of 14 engineeringrevisions made to the Model 10. The lockwork has remained the same after the -4revision, in which the earlier leaf spring powered trigger returnmechanism was replaced by a more durable coil spring powered slider.

The Model 10 was temporarily discontinued in 2010, only tobe immediately reintroduced in the current 4' heavy barrel version without the historic M&P tag. Theblued steel Model 10 revolver is offered today in pretty much its originalform, but only with a 4' heavy barrel and a rounded butt. All Model 10's from1958 to the present are suitable for use with .38 Special +P ammunition, aswell as all standard pressure .38 Special loads.

The M&P is built on Smith's medium size 'K'frame, which is an appropriate size for a six-shot, .38 Special revolver. Thesmall 'J' frame was designed for .32 caliber cartridges (such as the.32 S&W) and the big 'N' frame for .44/.45 caliber cartridges.

None of these S&W frame sizes were originally intended for use with Magnumcartridges. Thus it was that when the .357 Magnum cartridge was introduced in1935, it was chambered in a big N frame gun, which was unnecessarily large forthe caliber.

Later, the .357 was adapted to K frame guns, but it tended toshake them apart and the recoil is ferocious. It wasn't until much later, whenS&W copied the Colt Python size frame, calling it the 'L' frame,that they finally had a frame appropriate for the .357 Magnum.

The sights on the M&P are fixed (non-adjustable). Thefront sight is the angled (quick draw) front blade introduced with the -5series and the rear sight is the traditional square notch machined into the topof the frame. This is a durable, but limiting, sighting system that wasbasically regulated for use with the traditional 158 grain LRN 'policeservice' factory load. Good revolver sights should be user adjustable forwindage and elevation, since otherwise the sights can be properly regulated at the factory foronly one load at one distance.

The K38 Masterpiece (Model 14) is S&W's K-frame, adjustable sight .38 revolver.It is generally similar to the M&P, but supplied with a fully adjustablerear sight and undercut target type front blade that allows accurate use of thewide range of .38 Special loads on the market.

Most Model 10's came with a high polish, luster bluedoverall finish with a color case hardened hammer and trigger, although nickelfinish was also available for most of the gun's life. The nickel plated finishwas discontinued in 1991, well after the satin stainless steel Model 64 M&Phad been introduced, which effectively replaced the nickel finish. Thestainless Model 64 is otherwise the same as the Model 10. (S&W pads theirmodel list by using different model numbers for otherwise identical stainlessand blued finish guns.)

Previously supplied with a either a round or squarebutt and checkered wood grips, current production Model 10's come with a roundbutt (only) and wood grip panels, while Model 64 revolvers are supplied withUncle Mike's combat style rubber grips. The test gun has a square grip framewith S&W Magna walnut grip panels; it is in completely stock form.

2016 Model 10 Heavy Barrel Specifications

• SKU: 150786
• Caliber: .38 Special +P
• Action: SA/DA
• Capacity: 6 rounds
• Barrel: Threaded into frame
• Barrel length: 4' heavy
• Front sight: Fixed blade
• Rear sight: Fixed notch
• Overall length: 8-7/8'
• Frame size: Medium (K), exposed hammer
• Weight: 36 oz. (catalog)
• Grips: Wood, rounded butt
• Material: Carbon steel frame and cylinder
• Finish: Blue
• Purpose: Military and police service, home protection
• 2016 MSRP: $739

1962-1977 Model 10-5 Specifications (as tested)

• Condition: Used, excellent
• Caliber: .38 Special +P
• Action: SA/DA
• Capacity: 6 rounds
• Barrel: Threaded into frame and pinned in place
• Barrel length: 6' tapered
• Front sight: Fixed blade (1/8' wide)
• Rear sight: Fixed notch
• Overall length: 11-1/8'
• Frame size: Medium (K), exposed hammer
• Weight: 31 oz. (catalog); 32 oz. (actual)
• Grips: Walnut, Magna square butt
• Material: Carbon steel frame and cylinder
• Finish: Blue
• Purpose: Military and police service, home protection
• 1976 MSRP: $109

Like all S&W revolvers with swing out cylinders, thecylinder rotates counter clockwise, or out of the frame, because thehand that rotates the cylinder is on the right side of the frame and the cylinder swings out to the left. This is whyS&W revolvers have two cylinder locks, one in the form of a spring loadedpin at the front of the ejector rod and the second a hole in the recoil shieldat the rear of the frame window for the spring-loaded cylinder pin. The handtrying to rotate the cylinder out of the frame is also why S&W revolver cylindersare not quite as tight, with the trigger pulled back, as equivalentColt revolver models.

The firing pin is pinned into the hammer using a roll pin.There is rebounding hammer with an internal hammer block that positivelyprevents the firing pin from hitting the primer of a chambered cartridge untilthe trigger is pulled back, thus rendering the gun safe to carry with thecylinder fully loaded. The main (hammer) spring is a leafspring inside the grip frame, secured by a screw in the lower front of the grip frame.

The trigger pull of the test gun measured a clean fourpounds, per my RCBS pull scale. Like all S&W revolvers G&S Online has reviewed,the DA pull exceeded the eight pound max reading of my scale. It is probably onthe order of 12 to 14 pounds, so heavy that when dry firing I could not keepthe sights correctly aligned, no matter how slowly and carefully I tried topull the trigger.

This revolver's DA trigger function is adequate for use at contact range and not much else. If you want to hit what you are shooting at, cock the hammer manually for a SA trigger pull.

It is no secret that S&W has turned out a lot of poorly machinedand fitted revolvers, especially during the 1970's and 1980's. However, thistest gun has a tight and uniform cylinder gap, tight cylinder crane to frame fitand a uniformly machined cylinder star. The frame is straight and the barrel iscorrectly aligned in the frame. The side plate fits the frame perfectly, with anearly invisible line where the two meet. The hand ejector rod is straight, theaction is tight and there is very little cylinder play. The locking bolt doesnot drag between the cylinder locking notches and the cylinder indexes correctlyduring rapid DA fire. The grip panels correctly match the shape of the frameand are a tight fit. It is one of the good ones!

For the shooting part of this review I had .38 Specialstandard pressure Remington/UMC 130 grain Metal Case (MV 790 fps) and Winchester/USA125 grain JSP (MV 850 fps) factory loads. To represent .38 Special +P loads I used the Winchester/USA 125 grain JHP Personal Protection factory load (MV 945 fps). Groups were five shots at 25yards at slow fire pistol (bulls eye) targets, fired from a sturdy shootingbench using a Pistol Perch rest.

Guns and Shooting Online staffers GordonLanders, Rocky Hays and Jim Fleck helped me with the shooting chores. We did our test shooting at the Izaak Walton outdoor shootingrange south of Eugene Oregon. Overcast skies with a high temperature in theupper 50's F during our day at the range with the Model 10 were typical ofWestern Oregon weather in mid-March. The maximum wind velocity was 10-15 MPH. At least it did not rain.

Shooting results

• Remington 130 gr. MC: Smallest group = 1-3/4'; Largest group = 2-3/8'; Mean average group size = 2.13'
• Winchester 125 gr. JSP: Smallest group = 1-3/4'; Largest group = 2-3/4'; Mean average group size = 2.08'
• Winchester +P 125 gr. JHP: Smallest group = 1-1/8'; Largest group = 2-1/4'; Mean average group size = 1.79'

AVERAGE GROUP SIZE FOR ALL LOADS: 2.0'

This time out Jim shot the smallest individual group. Notethat none of our test loads were the 158 grain LRN factory loads (MV approx.800 fps) for which the Model 10's fixed sights were presumably regulated. Idetest plain lead bullets and almost never shoot such ammo in my revolvers, soI don't keep it on hand. Unfortunately, none was available for sale locally,due to the Obama ammo shortage.

The sights, although fixed, present a decent, Patridge typesight picture in daylight conditions. Point of impact with a two hand hold, forme, was 1.5' low and 1' to the left at 25 yards with the 125-130grain standard pressure ammo. The Winchester 125 grain +P loads grouped about1.25' low and approximately centered in windage.

Shooting a bit low withthese 125-130 grain loads was not surprising, as I figured the gun was intendedfor use with 158 grain police loads. If only the Model 10 had an adjustablerear sight it would be easy to zero this revolver to hit dead on at 25 yardswith 125 grain +P JHP ammo.

The SA trigger pull releases the hammer crisply, without anytake-up and very little over-travel. All shooters appreciated the cleantrigger. At a measured four pounds, the pull weight is about 1.5 pounds heavierthan I would like, but it is so crisp it feels lighter.

The wide trigger has a comfortably gentle curve and a grooved face. I prefer a smooth triggersurface. Never in my life can I remember my trigger finger slipping on a smooth trigger!

As with all S&W revolvers, the checkering on top of thehammer spur is too sharp and tends to abrade the skin of the shooter's thumb pad after alot of single action shooting. All of our test firing for ourrecorded groups was done single action, of course, to maximize accuracy. I havenever understood the gun manufacturers' fascination with sharp edges on handguns.

M&p Shield 9mm

S&W's two-piece Magna grips have to be among the mostuncomfortable ever designed from the standpoint of handling recoil and theyprovide no fill between the front of the grip frame and the back of the triggerguard. (Well, okay, they are better than the earlier S&W wood grips--faint praise, indeed.) However, the Magna grips servedsatisfactorily on the relatively heavy for caliber Model 10 with both standard pressure and +P .38 Special loads. Therevolver's 6' barrel and good balance helped minimize recoil and muzzle jump.

My only real complaint was that the S&W cylinder latch (slideforward to swing open the cylinder) was too tight and a bit difficult to operate. It tendedto hesitate or stick about half way when pressed forward, the only rough machine workwe found on this gun.

Despite its age, this revolver showed signs of havingbeing shot very little prior to this review, with no signs of wear due to use,or even from being carried in a holster. I doubt it had fired a full box ofammo (50 rounds) in its entire life. It had been purchased by G&S OnlineTechnical Assistant Nathan Rauzon's Grandfather for home defense and spentvirtually its entire life in a gun case. Thus, we had the pleasure of shootingwhat was functionally a new Model 10-5 revolver.

The S&W Military and Police Model 10 is a good choicefor police service and home defense, just as advertised. It is the right sizefor the .38 Special cartridge, which particularly in +P hollow point form, is anexcellent choice for both purposes.

Like any revolver, it can be leftfully loaded with all springs relaxed for years and still be ready forimmediate action at a moments notice, without any preparation. Just cock thehammer and squeeze the trigger to fire accurate SA shots, or simply pull thetrigger for very short range DA use in an extreme emergency.

For home defense, nothing is safer, more accurate, more reliable or more ambidextrous than a revolver. A good S&W Military and Police Model 10 is more than adequate for the job.

M&s Clothing

Note: This review is mirrored on the Product Reviews page.